Enter values into the required fields or leave it as, set by default settings. The general group contains information about the server only and this info is not relevant for making a connection
Networking group contains information required for the network connection
Enable Lookup:Leave this field as is
Network Prefix: Network prefix (up to 3 digits) used for dialing the PBX
IP Address: Enter a static IP address of your server
Entity ID: Enter a MAC address of the network card of your server
Bind Address: Leave this value as is
Port: Leave this value as is
Allow codecs: Select preferred codecs
Cash time: Leave this value as is
TTL: Leave this value as is
Store history: Leave this value as is
Navigate to 'Networks: RSA Keys'
Generate a new RSA key if one does not already exist
Navigate to 'Networks: Peers' and add the peer details
If everything was set correctly, you should have successfully connected the system server and created a peer. The same steps should be performed on the peer side. In essence, the IP address, MAC, and RSA key details are exchanged between the server and peer.
To make a call from System1 to System2, or vice versa, dial network prefix + extension number.
For example, on System1 dial: 251005, assuming that System2 network prefix is '25' and it has an extension number '1005'.
