|
Y Cable for A108 to 2 separate T1/E1 (straight). This is to connect the A108 against lines from the Telco.
A = port N; B = port N + 4
1 <-> 1A
2 <-> 2A
3 <-> 1B
4 <-> 4A
5 <-> 5A
6 <-> 2B
7 <-> 4B
8 <-> 5B
Y Cable for A108 to 2 separate T1/E1 (cross). This is to connect the A108 against another T1/E1 card.
A = port N; B = port N + 4
1 <-> 4A
2 <-> 5A
3 <-> 4B
4 <-> 1A
5 <-> 2A
6 <-> 5B
7 <-> 1B
8 <-> 2B
A108 to A108 (cross). This is to connect two A108s in a back-to-back configuration.
1 <-> 4
2 <-> 5
3 <-> 7
4 <-> 1
5 <-> 2
6 <-> 8
7 <-> 3
8 <-> 6 
|
